Fire-resistant cement boards: why Aestuver® sets the standard
The Aestuver® range of fire-resistant cement boards is a leading solution for high-performance passive fire protection. Manufactured by James Hardie Europe GmbH, the boards protect structures in demanding environments such as tunnels, buildings and industrial facilities.
What is an Aestuver® fire-resistant cement board?
Aestuver® fire protection boards are non-combustible, weather-resistant boards made from glass-fibre-reinforced, cement-bonded lightweight concrete with Type X classification. As Class A1 non-combustible building materials to EN 13501-1, they protect structural elements in buildings, tunnels and infrastructure against high temperatures in a fire.
The Aestuver® fire protection board (also known as Aestuver® BSP, ETA-11/0458) is used in partition and shaft walls, fire-rated ceilings and to protect steel and concrete elements. Its certified weather, frost and water resistance also makes it suitable for applications with high exposure to moisture and weathering. Depending on the system, application and board thickness, a range of fire resistance classes and fire exposures can be achieved.
For tunnels, Aestuver® fire protection board T (cast in, up to 1,350 °C) and Aestuver® fire protection board Tx (post-fixed, up to 1,400 °C) are tested to the tunnel fire curves ISO, ZTV-ING, EBA, HCM and RWS. Board thicknesses from 10 to 60 mm allow the system to be matched to the specific fire protection requirement.
Key features of the Aestuver® fire protection board:
Non-combustible: Class A1 to EN 13501-1
Type X classification to EAD 350142-00-1106 (weather-resistant)
Fire protection up to 1,200 °C
Apparent density: approx. 625–965 kg/m³
Thermal conductivity: approx. 0.21 W/mK (20 mm board)
Compressive strength: 9 N/mm² (20 mm board)
Flexural strength: 3.5 N/mm² (20 mm board)
Board thicknesses: 10–60 mm
Depending on the application, board thickness and system configuration, fire resistance periods of 60 to 240 minutes can be achieved.
Which fire-resistant cement board should you choose?
Fire protection, infrastructure or wet rooms – the right board for every application
The Aestuver® range of cement-based fire protection boards includes the following products, complemented by fermacell® boards for interior fit-out and wet rooms.
Aestuver® fire protection board
Aestuver® fire protection board T
Aestuver® fire protection board Tx
Aestuver® D+2 fire protection element
fermacell® Powerpanel H₂O
fermacell® Firepanel A1
Why should you choose Aestuver® fire protection boards?
Non-combustible, heat-resistant, water- and frost-resistant: Aestuver® fire protection boards reliably protect tunnel structures from the consequences of a fire.
The boards add no fire load and release no combustible components in a fire – meeting the strictest structural fire protection requirements for tunnels.
Fire protection up to 1,350 °C (board T) or 1,400 °C (board Tx), tested to international tunnel fire curves.
Resistant to water and freeze–thaw cycles, Aestuver® boards provide durable fire protection in areas fully or partially exposed to the weather.
Abrasion- and moisture-resistant with no organic components, so there is no risk of mould. The boards can be cleaned with high-pressure water jets or tunnel-cleaning vehicles.
Where are Aestuver® fire-resistant cement boards used?
Aestuver® cement boards are versatile and used across a wide range of industries:
Tunnel cladding and protection – Protection of concrete structures in road and railway tunnels against hydrocarbon fires (HC/HCM curves) and prevention ofconcrete spalling caused by fire.
Structural fire protection – Cladding for steel beams, columns, concrete elements and timber to improve their fire resistance.
Fire-resistant walls, partition walls and ceilings – construction of systems with EI classification (integrity and insulation), including shaft walls, suspended ceilings and structures with large spans.
Fire-resistant electrical enclosures, escape routes and ventilation shafts – preventing heat transfer through installations that pass through fire compartments.
Other applications – Fire-resistant linings in buildings, maintenance walkways, cable trough covers
Retrofitting fire protection to concrete structures
Thanks to these properties, the boards suit both new builds and retrofit projects – either cast directly into the concrete (permanent formwork) or post-fixed.
Durability and practical benefits of Aestuver® boards
All Aestuver® boards are highly durable and deliver long-term performance without loss of quality, even in harsh conditions.
Water- and freeze–thaw-resistant, with the highest exposure class, Type X (EAD 350142-00-1106, confirmed by ETA). Weather-resistant for harsh, damp environments such as tunnels.
Abrasion-resistant and easy to clean with high-pressure water jets or tunnel-cleaning vehicles with industrial brushes (cleanability verified to DIN EN ISO 11998).
Low dust emissions during installation – easy to cut and work with standard tools.
Low density, yet robust – board sizes such as 2,600 × 625 mm (board T) and 2,600 × 1,250 mm (fire protection board) allow efficient installation.
Compliance, certification and safety
Aestuver® boards hold European Technical Assessments (ETA) and meet international standards, including ASTM E84 (flame spread and smoke-developed index of 0), as well as various project-specific tests (impact resistance, jet fire, etc.). As part of James Hardie®, production complies with EN ISO 9001:2015 (quality) and EN ISO 14001:2015 (environment).
Looking for a trusted manufacturer of fire-resistant cement boards – especially for demanding applications that require two hours' fire resistance? Aestuver® fire protection boards combine high fire resistance, durability and versatility, providing cost-effective passive fire protection that helps prevent catastrophic damage and save lives.
For technical datasheets or project-specific advice, see the Aestuver® downloads or contact our team of experts.
Cement board with 2-hour fire resistance
The Aestuver® fire protection board provides 120 minutes of fire protection for steel, concrete slabs and other structural elements – a cement board with two hours' fire resistance.
How thick is a concrete slab with a fire resistance rating of 2 hours?
That always depends on the specific application.
With regard to fire protection for concrete, in accordance with the standard cellulose fire curve, a cement board with a fire resistance rating of 2 hours and a thickness of 15 mm is suitable for ceilings, columns and concrete beams.
However, for the fire protection of steel structures, cement boards with a fire resistance rating of 2 hours require greater thicknesses.
This depends on the steel section factor. The geometry of the steel section is defined by the A/V value in accordance with DIN 4102 Part 4 or the Ap/V value in accordance with EN 1993-1-2.
Both values describe the ratio of the surface area exposed to fire to the volume of the steel component.
Consequently, it can be said that the higher the profile factor, the faster the steel component heats up, and the greater the required thickness of the steel cladding must be – depending on the fire resistance rating.
The following table shows the minimum thicknesses for the Aestuver®® Cement board with a 2-hour fire resistance rating. As you can see, the minimum thickness is 25 mm for fire resistance class R120 on a steel beam with a profile factor of up to 45.
However, higher profile factors require a greater thickness for the cement board with a 2-hour fire resistance rating.
Any further questions?
Have a specific requirement? Our fire protection specialists will work with you to develop the right solution – from planning support and project-specific fire tests to technical assistance on site.
More Aestuver® products
Aestuver® fire protection boards are used far beyond tunnels – from structural fire protection in buildings to demanding infrastructure projects and specialist applications.