Walkable, fire-resistant covers for rail and metro infrastructure
The Aestuver® D+2 fire protection element is a walkable, fire-resistant cover for cable troughs in transport infrastructure, designed for access, maintenance and escape routes. Especially in rail and metro tunnels, it gives safe access to technical installations and makes maintenance and repair work easier.
Robust sandwich construction
The robust sandwich construction protects the installations beneath it in a fire – a fire resistance of 90 minutes is achieved for fire loads in the cable trough. The element is suitable for indoor and outdoor use, with proven resistance to water and freeze–thaw cycles.
With a permissible load of up to 12.5 kN/m², the system withstands continuous and dynamic traffic loads. Its low weight makes installation quick and maintenance straightforward.
The abrasion-resistant, durable surface is built for heavily used, high-wear infrastructure areas and is easy to clean in day-to-day operation.
Aestuver® D+2 light
Alongside the standard version, the Aestuver® D+2 fire protection element is available as D+2 light. This weight-optimised variant (42.5 mm, approx. 35.7 kg/m²) is designed for applications with lower loads or shorter spans.
It is even easier to handle and quicker to install – an economical alternative wherever the full load-bearing capacity of the standard element is not required.
Aestuver® D+2 fire protection elements combine reliable fire protection, high load-bearing capacity and easy handling. Glass-fibre-reinforced lightweight concrete gives them the right balance of stability and low dead weight – for easy installation without compromising load capacity.
Slip-resistant surfaces (R 10 to R 13) keep walkways and maintenance areas safe.
Permissible loads of up to 12.5 kN/m², including dynamic traffic loads.
Non-combustible (Class A1) with fire resistance I 90 / E 90 – reliable protection for cables and technical infrastructure.
Low weight makes the elements easy to handle and quick and economical to install.
Aestuver® D+2 in use
Walkable covers for cable troughs and ducts indoors and outdoors, including within the track area. They protect the cable trough in a fire and are a durable replacement for timber planks on walkways between the tracks.
The non-combustible lightweight concrete combines high load-bearing capacity with durability, and the walkable design makes maintenance and inspection easier.
System add-ons:
Slip-resistant surfaces (R 10 to R 13)
Aestuver® sealing tape
Pre-fitted board strips that stop the elements from shifting
Technical data and documents
Detailed documents for Aestuver® D+2 fire protection elements – from technical specifications and design documents to practical installation guidance. More documents are available in the download centre.
Dimensions
1,250 × 625 mm (other sizes on request)
Building material class (DIN EN 13501-1)
non-combustible, A1
Thickness
52.5 mm (D+2) / 42.5 mm (D+2 light), ± 2 mm
Tolerances
± 1 mm (length, width)
Weight
47 kg/m² (D+2) / 35.7 kg/m² (D+2 light)
Fire resistance
EI 120
Alkalinity (pH value)
~ 12
Equilibrium moisture content
approx. 7 % by weight (65 % RH, 20 °C, DIN EN ISO 12570)
Maximum permitted load
1.85 to 12.5 kN/m² (depending on variant and span)
Slip resistance
R 10 (standard); R 12 and R 13 to customer specification
BIM data for planning
Aestuver® provides comprehensive BIM data for efficient, precise planning. Seamless integration with standard design tools supports fully digital planning and coordination from concept to completion.
Project references
Talk to our D+2 experts
Which Aestuver® D+2 solution is right for your project?
Escape and rescue routes, cable trough covers or other tunnel and infrastructure applications – fire protection, load and design requirements vary from project to project. Our experts will help you select, design and specify the right Aestuver® D+2 solution.
Together, we will find a solution that is technically sound and cost-effective.
FAQ
Quick answers to the most frequently asked questions about planning, installing and using Aestuver® D+2.
Yes – with a slip-resistant coating (R 13), Aestuver® D+2 elements can be used outdoors permanently.
We supply Aestuver® D+2 elements cut precisely to customer specifications.
Standard sizes go up to 1,250 × 625 mm; larger formats are available on request.
The load-bearing capacity depends on the span.
For small spans of up to 600 mm, for example, traffic loads of more than 10 kN/m² can be supported.
With a live load of 5 kN/m², the span can be up to 950 mm.
The weight per unit area is approximately 50 kg/m², so a cable trough cover measuring 700 × 600 mm, for example, weighs approximately 21 kg.
This combines low weight with high load-bearing capacity.
In principle, no further accessories are required.
Sealing strips can be supplied as an option; they are fitted between the cable trough and the D+2 element to stop the elements rocking. Pre-assembled inspection aids are also available.
More Aestuver® products
Aestuver® fire protection boards are used far beyond tunnels – from structural fire protection in buildings to demanding infrastructure projects and specialist applications.