Aestuver® solutions for facades, roofs and parapets

Facades, roofs and parapets

Fire protection for facades, roofs and parapets with Aestuver®

Facades, roof overhangs and parapets are among the most critical areas in structural fire protection. It is at these junctions that the risk of uncontrolled fire spread is particularly high. Aestuver® fire protection solutions have been specially developed for these high-risk areas: they protect the building envelope and adjacent components and prevent fire from spreading via the façade, roof overhangs or parapets.

Facades and roof overhangs

Facades and roof overhangs place particular demands on structural fire protection, as they are crucial to the safety of the building envelope. Aestuver® fire protection solutions provide reliable protection for these critical areas.

Aestuver® spandrel and apron element

Aestuver® spandrel and apron elements reliably prevent fire spread in facade constructions. The element meets high fire resistance requirements, is permanently weather- and moisture-resistant and can be used outdoors without an additional coating.

Advantages:

  • Fire resistance EI 90 / EI 120

  • Prevents fire spread in accordance with EN 13830

  • Weather- and moisture-resistant; suitable for outdoor use without an additional coating

  • Project-specific solutions developed together with our fire protection experts

System data:

  • Classification: DIN EN 13501-2 – KB-C06-01-de-01

  • Fire spread – façade surface, EN 13830

  • E 90 (o-i), EW 90 (o-i), EI 90 (o-i)

  • Fire spread – perimeter seal, EN 13830: EI 120

Aestuver® cladding for roof overhangs against fire spread

Aestuver® cladding for roof overhangs reliably prevents fire spread, increasing safety in sensitive areas such as facades and roof edges. The system is designed for challenging situations, such as buildings on or close to the property boundary where the required clearance is not met.

Advantages:

  • 90 minutes’ protection against fire spread

  • Board thickness d = 25 mm

  • Fixing into CD ceiling profiles or directly into the timber from above

  • For buildings on the boundary where the boundary clearance is not met

Download the construction sheet

Roof and parapet

The roof and parapet form the upper boundary of the building envelope and are therefore particularly critical areas in structural fire protection. Installing these components in line with fire safety requirements is key to preventing fire spreading across roof surfaces. Aestuver® offers certified system solutions specifically developed for these high-risk areas.

Fire wall – connection below the roof cladding

Fire walls prevent fire spreading between different parts of a building and are therefore a crucial part of structural fire protection. To stop fire spreading across roof areas, the connection of fire walls beneath the roof covering is particularly important. Based on the German Model Building Code (MBO, § 30), proven constructions with Aestuver® fire protection boards provide a standards-compliant, practical solution that reflects the current state of the art.

Basis: German Model Building Code, § 30: fire walls must be made of non-combustible building materials and must remain fire-resistant even under additional mechanical loads.
Under § 30(5) MBO, fire walls must extend 0.30 m above the roof covering or, alternatively, be terminated at the level of the roof covering on both sides by a fire-resistant construction at least 0.50 m wide made of non-combustible building materials.
The construction shown, made of 25 mm Aestuver® fire protection boards, meets the requirements set out in the technical literature (see construction sheet) and therefore reflects the state of the art.
Project-specific approval by the building control authority or a fire safety expert is required.

View details in the structural fire protection brochure

Specialised solutions for roofing and timber construction

Parapet capping on timber

For roofing and timber construction, Aestuver® fire protection boards offer safe, non-combustible special solutions for parapets. In high-rise buildings or special structures, they can be used as a non-combustible alternative to timber planks or wood-based panels.

Advantages:

  • Top and side cladding with 25 mm Aestuver® fire protection boards

  • Non-combustible in accordance with DIN EN 13501-1; water- and frost-resistant

  • Type X according to EAD 350142-00-1106, suitable for outdoor use

  • Tailor-made solutions on request

Parapet capping on concrete parapets

Parapet capping on concrete parapets must meet high standards of weather resistance and fire safety. Aestuver® offers non-combustible system solutions for safe, durable outdoor installation that are also water- and frost-resistant.

Advantages:

  • Top cover made of 25 mm Aestuver® fire protection board

  • Non-combustible in accordance with DIN EN 13501-1; water- and frost-resistant

  • Type X according to EAD 350142-00-1106, suitable for outdoor use

  • Tailor-made solutions on request