Fire protection solutions for every tunnel type

Road, rail, immersed or cut-and-cover: every tunnel type has its own structural fire protection requirements. Aestuver® offers tailored solutions for new builds and refurbishments.

Different tunnels. Different requirements.

Tunnels differ in use, design and construction method – so their structural fire protection requirements differ too, from fire exposure and installation to resistance to moisture and frost.

Aestuver® fire protection systems keep concrete and reinforcement below critical temperatures. Depending on the tunnel type, the boards are cast in during concreting (permanent formwork) or fixed to walls and ceilings afterwards (post-fixed).

Road tunnel

Vehicle fires can generate extreme temperatures and damage concrete and reinforcement. Aestuver® protects the tunnel structure and meets the requirements of the relevant tunnel fire curves, such as RWS, ZTV-ING and HCM.

Typical requirements

  • Protection of concrete and reinforcement

  • Prevention of concrete spalling

  • Preservation of load-bearing capacity

  • Lower refurbishment costs and shorter closures

  • Resistance to moisture, freeze–thaw cycles and tunnel cleaning (surface coating where road salt is used)

Aestuver® solutions for road tunnels

New build or refurbishment – we offer the right fire protection solution for every project.

Aestuver® fire protection board T
Cast directly into the concrete – ideal for new-build projects.

Aestuver® fire protection board Tx
Post-fixed solution for existing tunnels, refurbishment and modernisation.

Rail tunnel

Safe solutions for rail traffic and escape routes

Rail, suburban rail and metro tunnels need tailored solutions to protect the tunnel structure, technical installations and escape and rescue routes.

Fire protection in rail tunnels is subject to particularly strict requirements. The EBA fire curve rises very rapidly, reaching 1,200 °C after just five minutes – fire protection systems must withstand these conditions reliably.

Typical requirements

  • Protection of tunnel walls and ceilings

  • Safe escape and rescue routes

  • Non-combustible cable trough covers

  • Heavy-duty, walkable surfaces

  • Resistance to water, frost and abrasion

Aestuver® solutions for rail tunnels

Aestuver® fire protection board Tx protects concrete and reinforcement from extreme temperatures and is fixed to tunnel walls and ceilings – including as a retrofit.

Aestuver® D+2 fire protection element is designed for escape and rescue routes and cable trough covers in underground transport systems. It is:

  • non-combustible (Class A1)

  • water- and frost-resistant

  • abrasion-resistant and easy to clean

  • load-bearing up to 12.5 kN/m²

  • quick to install and replace

Immersed tunnel

Integrated fire protection for prefabricated tunnel elements

Immersed tunnels consist of prefabricated elements that are floated into position, lowered and joined together. Fire protection must therefore be built into the design and production of the elements from the outset – including the joints and transitions between elements, for a consistent fire protection concept.

Typical requirements

  • Integration into prefabricated tunnel elements

  • Long-term resistance to water and moisture

  • Protection of the concrete structure and reinforcement

  • Fire-rated detailing of joints and transitions

  • High durability in demanding environments

Aestuver® solutions for immersed tunnels

  • Aestuver® fire protection board T is placed on the formwork and cast into the concrete – it becomes a permanent part of the tunnel structure and is typically used for prefabricated immersed tube sections.

  • For existing structures or supplementary areas, Aestuver® fire protection board Tx can be post-fixed.

  • Specialist products such as Aestuver™ joint rope T protect critical joints between the tunnel elements and complete the fire protection concept.

Cut-and-cover tunnel

Efficient fire protection for cut-and-cover tunnels

Cut-and-cover tunnels are built in an open excavation that is backfilled once the structure is complete. This construction method allows fire protection to be built directly into the concrete structure.

Typical requirements

  • Economical integration into the construction process

  • Protection of ceilings and walls

  • Short installation times

  • Coordination of formwork, concreting and fire protection works

  • Durable, low-maintenance structures

Aestuver® solutions for cut-and-cover tunnels

Aestuver® fire protection board T is cast in during concreting and remains a permanent part of the tunnel structure. The benefits:

  • Integrated fire protection – no retrofitting required

  • Fewer installation steps

  • No mechanical fixings and no overhead lifting of boards

  • Contractors report installation up to three times faster than with post-fixed systems

For refurbishment or retrofitted fire protection, Aestuver® fire protection board Tx is the alternative.

Protection, functionality and design combined

More than just fire safety

Aestuver® fire protection boards combine reliable fire protection with design flexibility. Finishes ranging from ceramic tiles and coating systems to durable faceted panels with a thin laminated fibre cement layer let you tailor appearance, surface durability and light reflection to the project.

Particularly suitable for:

  • Visible tunnel sections and portals

  • Urban infrastructure projects

  • Rail and metro facilities

  • Architecture-led design concepts

Looking for more design options?
For exposed tunnel sections, Aestuver® fire protection can be combined with design applications based on fermacell® Powerpanel HD – for durable, functional and attractive surfaces.

Explore fermacell® design applications

Flexible to install. Reliable in a fire.

The right solution depends not only on the tunnel type, but also on whether the project is a new build, a refurbishment or a modernisation.

Aestuver® fire protection boards adapt to different construction methods and project requirements. Depending on the application, they can be cast directly into the concrete or post-fixed at a later stage. The result is a cost-effective fire protection solution that integrates flexibly into the construction process and protects the tunnel structure against critical temperatures over the long term.

Find detailed information on installation methods in our tunnel brochure

Fire protection cladding cast into concrete (permanent formwork)

Post-fixed fire protection cladding

Aestuver® fire protection boards at a glance

Non-combustible, heat-resistant, water- and frost-resistant: Aestuver® fire protection boards reliably protect tunnel structures from the consequences of a fire.

Non-combustible
Class A1 to EN 13501-1

The boards add no fire load and release no combustible components in a fire – meeting the strictest structural fire protection requirements for tunnels.

up to 1,400 °C
fire protection rating

Fire protection up to 1,400 °C (board T and Tx), tested to international tunnel fire curves.

Weather-resistant
Type X to EAD 350142-00-1106

Resistant to water and freeze–thaw cycles, Aestuver® boards provide durable fire protection in areas fully or partially exposed to the weather.

Easy to maintain
cleanability verified to DIN EN ISO 11998

Abrasion- and moisture-resistant with no organic components, so there is no risk of mould. The boards can be cleaned with high-pressure water jets or tunnel-cleaning vehicles.

Project support from our tunnel experts

Which fire protection solution is right for your tunnel?

Tunnel type, construction method, fire curve and installation conditions determine the design of the fire protection system. Our experts will help you develop the right project-specific solution – from planning to installation on site.

FAQ

Concise answers to the key questions about using Aestuver® fire protection boards in tunnels.

View all FAQs