Passive fire protection for road and rail tunnels
Tunnel fires can reach 1,200 °C within minutes. Aestuver® passive fire protection boards shield the concrete and reinforcement from this heat – preventing explosive spalling, preserving load-bearing capacity and keeping closures after a fire to a minimum.
Confined space, extreme heat, high stakes
In the confined space of a tunnel, temperatures rise within minutes and escape, rescue and repair become far more difficult. Without passive fire protection, the structure can suffer severe damage – resulting in long closures, extensive refurbishment and significant economic losses for operators and the surrounding region.
Aestuver® boards shield the tunnel lining from extreme temperatures and prevent damage that could compromise structural stability and the safety of tunnel users.
Less structural damage means less restoration work and lower repair costs after a fire.
Consequential damage is kept to a minimum and damaged boards can be replaced quickly, so the tunnel can be repaired and reopened to traffic sooner.
Load-bearing capacity and leak-tightness are maintained, safeguarding the long-term safety and availability of the infrastructure.
Concrete spalling: the greatest structural risk in a tunnel fire
Concrete spalling
What happens to concrete in a tunnel fire?
As concrete heats up, the moisture inside it evaporates and builds up steam pressure. This pressure can cause explosive spalling: layers of concrete break away, exposing the reinforcement and reducing the load-bearing capacity of the structure. High-strength and high-performance concretes are particularly susceptible, as their low porosity traps the steam.
Consequences of concrete spalling
Exposed reinforcement
Accelerated corrosion of the reinforcing steel
Loss of load-bearing capacity
Extensive refurbishment and long closures
A thermal barrier between the fire and the structure
Installed as permanent formwork or fixed to the finished lining, fire protection boards limit the temperature at the concrete surface and the reinforcing steel. The required performance is defined nationally or for each project using internationally recognised time-temperature curves: ISO 834, ZTV-ING (RABT), EBA, HC, HCM and RWS. Aestuver® boards meet or exceed the requirements of all of them.
Limits the thermal load on the tunnel structure and protects load-bearing elements in the event of a fire.
Keeps the concrete below critical temperatures, preventing explosive spalling and preserving structural integrity.
Keeps concrete and reinforcement within the temperature limits set for the project – the precondition for structural stability in a fire.
Reduces restoration costs, downtime and the financial impact of a fire.
The biggest costs of a tunnel fire come afterwards
The greatest economic damage is rarely caused by the fire itself. Restoration work, long closures, diversions and lost revenue can multiply the cost of a single incident. A cost-effectiveness study by STUVA shows that the follow-up costs of a tunnel fire can far exceed the life-cycle costs of a passive fire protection system.
from tunnel closure than the life-cycle costs of the fire protection system*
from detours and additional distance travelled during the closure*
than the life-cycle costs of the fire protection boards*
*Example calculation for a toll tunnel with one major fire in 100 years (STUVA study, 2019)
White paper: the true cost of a tunnel fire
Find out what a tunnel fire really costs operators and the wider transport network – and why investing in passive fire protection pays off.
Why choose Aestuver® fire protection boards?
Long-term tunnel safety with Aestuver®
Aestuver® fire protection boards are made from cement-bonded, glass-fibre-reinforced lightweight concrete. They shield tunnel structures from extreme thermal loads and keep the structure intact in a fire. Non-combustible (A1), water- and frost-resistant and classified Type X for exposed applications, they meet the most demanding tunnel fire protection requirements – and leave room for individual design, from coatings to ceramic tile finishes.
Aestuver® fire protection boards at a glance
Non-combustible, heat-resistant, water- and frost-resistant: Aestuver® fire protection boards reliably protect tunnel structures from the consequences of a fire.
The boards add no fire load and release no combustible components in a fire – meeting the strictest structural fire protection requirements for tunnels.
Fire protection up to 1,350 °C (board T) or 1,400 °C (board Tx), tested to international tunnel fire curves.
Resistant to water and freeze–thaw cycles, Aestuver® boards provide durable fire protection in areas fully or partially exposed to the weather.
Abrasion- and moisture-resistant with no organic components, so there is no risk of mould. Clean with high-pressure water jets or tunnel-cleaning vehicles.
Videos: tunnel fire protection in practice
Watch how Aestuver® fire protection systems protect tunnel structures and help keep closures to a minimum.
Talk to our tunnel experts
Have a specific requirement? Our tunnel fire protection specialists will work with you to develop the right solution – from planning support and project-specific fire tests to technical assistance on site.
FAQ
Answers to the most common questions about concrete spalling, tunnel fire protection and the applications of Aestuver® fire protection boards.
Existing tunnels can be protected by retrofitting fire protection cladding. The fire protection panels are mechanically fixed to walls and ceilings, protecting the existing concrete structure from damaging temperatures in the event of a fire. |
Yes. The surface is abrasion-resistant and can be cleaned using high-pressure washers, tunnel wash systems or industrial brushes. Its cleanability has been tested in accordance with DIN EN ISO 11998. |
Individual slabs can be removed for inspections or repairs and then reinstalled. This ensures that leaks or damage to the concrete structure remain easily accessible. |
Passive fire protection acts as a thermal barrier between the fire and the concrete structure. This reduces the critical temperatures reached by the concrete and reinforcement, thereby significantly reducing the risk of concrete spalling. |
Yes. Studies show that fire protection panels can significantly reduce repair times and tunnel closures. This helps to reduce the high costs associated with diversions, traffic disruption and loss of use. |
More Aestuver® products
Aestuver® fire protection boards are used far beyond tunnels – from structural fire protection in buildings to demanding infrastructure projects and specialist applications.