Your project is in safe hands
Advice and support
Every project has its own specific requirements. That is why we are happy to help you develop bespoke solutions – from analysing the overall situation to drawing up a tailor-made concept. Contact our sales team for personal, expert advice.
Frequently asked questions
Answers to the most frequently asked questions about the application, planning and practical use of Aestuver® fire protection boards.
Technically, Aestuver® fire protection boards can be used outdoors permanently without an additional coating. For aesthetic reasons, however, we recommend structural weather protection or a suitable coating. Exception: in road tunnels, a surface coating is required for frost and road-salt resistance. Detailed information can be found from page 103 of the Aestuver® fire protection manual.
Coatings with commercially available dispersion-, silicate-, synthetic resin- or acrylic-based products are possible. A deep-penetrating primer is recommended. For skimming the surface, fermacell™ Powerpanel fine surface treatment is suitable in combination with full-surface reinforcement using fermacell™ HD reinforcing mesh. The fermacell™ HD render system is also approved. Application instructions can be found from page 103 of the Aestuver® manual.
Depending on the construction, the boards are either fixed board-to-board with staples or screws, or mounted on a metal, timber or concrete substructure. Detailed recommendations on suitable fixings can be found on pages 106–107 of the Aestuver® manual.
Aestuver® fire protection boards are available from building materials retailers in Germany, such as specialist dealers for drywall, insulation, roofing and insulation technology.
According to the European Assessment Documents (EADs), there are four use categories:
Type X: indoors, partially exposed and fully exposed to the weather – the highest requirement level
Type Y: indoors and areas partially exposed to the weather (e.g. covered outdoor areas)
Type Z1: indoors with high humidity or fluctuating temperatures
Type Z2: indoors only, with constant climatic conditions
Aestuver® fire protection boards meet the highest category, Type X (EAD 350142-00-1106).
More tools and planning aids
Make use of our digital services and information on structural fire protection: from BIM data and approved constructions to the online fire protection planner, you will find a wide range of tools and information to support you at every stage of your project – so you can plan and implement it efficiently, safely and practically.