More value in every phase of construction
Aestuver® FireShield supports your project through every construction phase – from planning and shell construction to building services installation and the final fire stop. The complete system:
Minimises coordination and planning effort
Improves the construction site: better health and safety and higher quality of workmanship
Speeds up construction: a dry site with a ready-made solution
Increases usable floor space: zero clearances allow compact shafts
Planning
Added value in the planning phase
Less work for architects and specialist planners
Aestuver® FireShield integrates seamlessly into digital planning and can easily be incorporated into existing BIM models. On request, we handle the entire model integration, significantly reducing the workload for architects and specialist planners.
Because installations can be placed with zero clearance, shafts can be designed much more compactly with Aestuver® FireShield. This reduces the space required inside the building and creates additional lettable or saleable floor space – a measurable economic benefit for owners and investors.
Tendering
Added value in the tendering phase
We support architects and specialist planners from the tendering phase onwards and, on request, prepare the Aestuver® FireShield system specifications for the bill of quantities. This significantly reduces the planning workload and frees up time for other tasks.
Standardised, clearly worded system specifications also improve transparency, comparability and cost certainty in the tendering phase.
Shell construction
Added value in the shell construction phase
Safety
Aestuver® FireShield becomes an integral part of the building structure as early as the shell construction phase – cast into concrete in concrete slabs and screwed in place in timber floors. Closed, safe shaft areas are created at an early stage, supporting a smooth construction process from the start.
Load capacity
With a load capacity of up to 800 kg/m², Aestuver® FireShield can be walked on safely and used during construction. This improves health and safety and site logistics, and helps organise work more efficiently.
Optimised use of space
Just-in-time delivery of Aestuver® FireShield means no storage space is tied up unnecessarily on site, so the available space can be used to the full.
Added value during interior fit-out
Because the shafts are integrated and closed at an early stage, Aestuver® FireShield ensures a dry, protected construction site – ideal conditions for rapid progress. Following trades can start work sooner.
The result: more efficient, smoother processes, simpler and more reliable coordination between trades, and confidence that construction schedules and project deadlines will be met.
Building services installation
Aestuver® FireShield has been specifically developed to make building services installation easier in practice. Openings can be created easily with standard tools – there is no need for time-consuming, costly core drilling.
The low component thickness in the penetration area – only approx. 54–68 mm – makes installation particularly straightforward. The result: shorter installation times, lower costs and significantly less work for the trades involved.
Fire stopping
Aestuver® FireShield makes fire stopping particularly efficient and user-friendly. Installation is carried out conveniently from above, so neither scaffolding nor access from below is needed. Because the dry installation method requires no mortar, there are no drying times to allow for. This speeds up construction and simplifies scheduling.
In addition, one system approval covers all pipe types within the fire stop, ensuring maximum planning certainty and straightforward implementation on site.
The holistic system approach offers another key advantage: a single point of contact for the entire fire stop system. This reduces interfaces, simplifies communication and minimises risks in execution and warranty.
Aestuver® FireShield in practice
The video shows each installation step for Aestuver® FireShield – clearly structured and easy to follow.
Your contacts for Aestuver® FireShield
From planning and process coordination to project-specific requirements, our experts support you through every phase of your project.
Victoria Sawamura
Technical Sales & Specification Manager
Tel: +49 211 97537969
Victoria.Sawamura@Jameshardie.com
Mina Altavilla
Technical Sales & Specification Manager
Tel: +49 211 97537968
Mina.Altavilla@Jameshardie.com
Andreas Bissinger
Aestuver® FireShield Technical Sales – Germany
Tel: +49 170 76 78 502
andreas.bissinger@jameshardie.com
Frequently asked questions about Aestuver® FireShield
Answers to the most important questions about planning, applying and using Aestuver® FireShield.
The Aestuver® FireShield elements are installed under the responsibility of the site foreman. As the foreman is in direct contact with the Aestuver® FireShield partner company, delivery dates and batch sizes are agreed jointly. The foreman then receives a numbered opening plan from the partner company, which clearly shows every element and its position.
The elements are usually configured and manufactured according to the project’s opening plan. In addition to project-specific prefabrication, the following standard sizes are available: 625 × 625 mm, 1,250 × 625 mm and 1,250 × 2,600 mm. On request, we are also happy to develop a standard size with you for your typical construction method.
Aestuver® FireShield elements are manufactured at our factory in Calbe (Saale), Germany, in accordance with the requirements of the aBG. The fire protection boards used for them are also produced there.
Both the openings in Aestuver® FireShield and the fire stops for these openings are made by a trained specialist company – giving you a clean, complete solution from a single source. As safety is our top priority, our partner companies attend refresher training every year so that they are always aware of the specific risks of working in riser zones.
In principle, the site management decides when the openings in Aestuver® FireShield are made. However, the Aestuver® FireShield team recommends that the Aestuver® FireShield partner company only cuts the openings once the floor above has been concreted with its Aestuver® FireShield elements. This keeps the building watertight and allows building services installation to start promptly.
Find out more about Aestuver® FireShield
A comprehensive overview of Aestuver® FireShield as a holistic fire protection system – with detailed information on its structure, applications and installation throughout the construction process.