Tunnel fire protection references

Proven passive fire protection for road, rail and metro tunnels worldwide.

Heathrow Cargo Tunnel, London

As part of the modernisation of the 800-metre Heathrow Cargo Tunnel, more than 20,000 m² of ceiling and wall area is being upgraded to current fire safety standards. The project uses 35 mm Aestuver® fire protection boards Tx mounted on a stainless-steel substructure. The boards protect the concrete structure at temperatures of up to 1,400 °C and meet the project's RWS 120 fire resistance requirement. Rapid retrofitting during night-time closures shortens the construction programme and minimises disruption to airport operations.

Download reference

Söderled Tunnel, Stockholm

As part of the refurbishment of the Söderled Tunnel, around 23,000 m² of ceiling area was upgraded to current fire safety standards. 20 mm Aestuver® tunnel fire protection boards were installed to protect the concrete structure reliably from high fire temperatures.

Quick, dry installation and the boards' water and frost resistance enabled efficient delivery in line with the demanding requirements of tunnel operations.

Ellinikon Tunnel, Athens

As part of the Ellinikon urban development project, the six-lane Poseidonos Avenue is being rerouted through a tunnel over a distance of approximately 1.15 kilometers. Aestuver® T and Aestuver® Tx fire protection boards are being used for structural fire protection, shielding the concrete structure from high fire temperatures.

The fire protection cladding, which is cast into the concrete, enables particularly fast and efficient installation: A three-person team can install and cast approximately 450 m² in just two days. At the same time, no additional anchors or dowels are required, and other trades can continue working in parallel.

Bergisel Tunnel, Austria

As part of the refurbishment of the Bergisel Tunnel near Innsbruck, around 19,000 m² of ceiling area was upgraded to current fire safety standards using Aestuver® fire protection boards Tx, which protect the concrete structure from high fire temperatures.

The complete fire protection cladding was installed in just 12 weeks, with one further week for finishing work.

Bergisel Tunnel, Austria

Tuen Mun – Chek Lap Kok Link, Hong Kong

The Tuen Mun – Chek Lap Kok Link is a 9.7 km road link that includes a 4.8 km underwater tunnel. Around 460,000 m² of Aestuver® fire protection boards Tx in various thicknesses were used to protect the concrete structures.

Within just 18 months, around 520 km of edge strips and 3.2 million fixings were also supplied. A continuous, reliable supply of materials was crucial to the smooth delivery of this major project.

Tuen Mun – Chek Lap Kok Link, Hong Kong

Louis-Hippolyte-La Fontaine Tunnel, Montreal, Canada

As part of the comprehensive refurbishment of the 1.4 km Louis-Hippolyte-La Fontaine Tunnel, the passive fire protection was also upgraded. Aestuver® fire protection boards Tx were mounted on a stainless-steel substructure on the tunnel ceiling, primarily to protect the critical ventilation equipment above. Project-specific fire and load tests confirmed the system's performance, including a 180-minute fire test to the HCM curve. The system contributes to the long-term protection of the tunnel infrastructure and to the goal of extending its service life by a further 40 years.

Download reference

Ruhrbahn underground railway, Essen, Germany

As part of the refurbishment of the Essen underground railway, the old wooden and concrete cable trough covers were replaced. More than 2,500 Aestuver® D+2 fire protection elements were installed, which also serve as safe escape and rescue routes. The non-combustible elements are suitable for dynamic loads, slip-resistant, and resistant to water and frost.

Their low weight makes installation easier and allows quick access to the cable troughs for routine maintenance and inspection.